Damper Hose
When connected Check Valve to Hookah harness, this Damper hose prevents a breakage from the portio of screw attached due to caused by the tension from Hookah hose.
When the impact is affected to the component attached, it absorbs its impact by the hose being deformed.
When attaching Bio-filter etc., if the interference is occurred, it can be prevented by
connecting an extension hose. It also can be used in the case of Hookah & 1st stage for scuba.
Spec
● Length： 120mm
● Spec for screw： 3/8”-24UNF male ? 3/8”-24UNF female
● Pressure used： below 1MPa
● Gas in use： Air (also, Nitrox-EAN w/oxygen pressure less than 40%)
● Adaptor TM(3/8”male-check valve attachment) is needed when connecting to Check Valve.
Under the situation being connected with Check Valve